Do primeiro esboço a uma maquete 3D detalhada com cenário, e tudo que vem no meio.
Arraste trilho reto para sua base virtual e clique as peças para encaixá-las. Mova ou gire seções inteiras, e curve trilho flexível exatamente da forma que quiser. Menus de contexto mostram de relance o que você pode fazer onde está.
Não é apenas um visualizador que mostra seu projeto em perspectiva, mas um editor construído desde o início para trabalhar em três dimensões. Prefere trabalhar em 2D por um tempo? Alterne entre eles quando quiser.
Projete sua maquete dos sonhos com trilho da sua marca favorita. Misture livremente: pegue os melhores desvios de uma marca e combine com o melhor trilho flexível de outra, tudo no mesmo projeto.
Termine sua maquete com montanhas, edifícios, estradas, árvores e grama, tudo renderizado de verdade. Você pode até assistir as árvores e a grama se mexerem ao vento.
Deixe o computador verificar se seu projeto funciona. Evite uma locomotiva grande ficar presa em um túnel depois, ou uma curva ser muito fechada. TRAX fica de olho se sua maquete atende aos principais padrões NEM e NMRA.
Mostre ao mundo o que você construiu. Publique seu plano de trilhos aqui na plataforma, ou use o visualizador gratuito para colocar seu projeto direto no seu próprio site.
Junte-se a milhares de modelspoorders. Encontre inspiração, troque ideias, dê sua opinião sobre os projetos uns dos outros e peça conselho nas partes difíceis.
Suas doações são o que mantêm TRAX gratuito para todo modelspoorder, e é o que dependemos.
Apoie TRAX3DO que você precisa para construir sua maquete dos sonhos? Nos diga, e encontre outros modelspoorders que queiram apoiar seu pedido.
Solicite uma funcionalidade42 funções. Filtre pelo que é novo, o que já estava em TRAX2, ou uma parte do editor.
Drag a piece onto a free connection and it snaps into place, facing the right way.
More than a hundred libraries from over forty makers, with the manufacturers’ own dimensions.
Pieces from different makers join as long as the gauge is the same, H0m on TT track included.
Bend flex track freely by two handles, or lay a straight or a curve of a set radius and angle.
Single and double slips know which curves a train can take, and draw them.
Two tracks with a crossover each way, as one piece.
A turnout route can bend twice, as Peco’s curved turnouts do.
Turntables with their own number of connections, in 3D with bridge, pit and rim.
Set a piece’s height; the connected track follows within the maximum grade.
A locked piece keeps its height relative to its neighbours: a station goes up as one.
The padlock pins a connected run down, so it cannot be moved or turned by accident.
Mark track as tunnel or bridge; the landscape makes a hill or a valley for it.
When a library was corrected since the save, the editor says which pieces it affects.
Every piece has its own number in the status bar, to say exactly which piece you mean.
Drag corners, slide sides, add or remove corners, and put a table anywhere in 3D.
One button puts down a rectangular table of 2 by 1 metres.
Fits a table round the track that is already there, and warns where you cannot reach.
Tables at different heights, each with the track that belongs to it.
Seven brushes: raise, lower, smooth, flatten, trench, noise and slope.
Hills, valleys, cuttings and embankments round the track, from one number you can keep.
Nine layers of ground, laid by slope and height on their own, and paintable by hand.
Switched on, the ground adapts under track, roads and buildings.
Tufts of growth that move in the wind, each kind at its own height.
Draw a line and choose what it becomes; a retaining wall makes a real step in the ground.
Lakes, seas, rivers and canals with waves, current and bank protection.
Spray them in groups or place them one by one; every tree can be moved on its own afterwards.
Drag buildings from the catalogue onto the table, turn and scale them.
Stones, rubble, crates and barrels that settle to the slope.
A platform along the track at the right distance and height, with its edge and a ramp.
A clean drawing with track in its legend colour, article numbers and ink lines.
Lengths, angles, heights and labels in the drawing, in the colour you choose.
Every table side is measured in the drawing; double click to change the size.
A grid with a heavier line every metre, switched on and off.
Switch between a top view and looking round freely in 3D.
Sun and shadow, sky, textures and wind.
A figure of 1.75 metres with a ruler, at your layout’s scale.
Make the hills transparent to pick track in a tunnel.
Your layouts live on the server and you choose which ones to share in the showcase.
Every step can be undone and redone.
Import a TRAX2 plan file (.trx); it is converted to 3D, a drawn landscape included.
Send what happened in the editor with a support question, and see first what that is.
The editor and the site speak three languages.
Nenhuma função corresponde a esses filtros.